User`s guide

Subnet
Glossary
G-9
RARP (Protocol)
rarp (Reverse Address Resolution Protocol) is a low-level transport layer
protocol that reads the Internet address at printer startup.
Remote Console
Software that allows you to access printer information and change printer
configuration settings from any workstation on the network
Remote Printer
A printer connected directly to a network rather than to a workstation and
shared by all network users.
RJ45 Connector
A type of network connector used with twisted-pair Ethernet cable.
Router
A computer that attaches to two or more similar networks and passes data
from one to another. To accomplish this, it examines data addresses,
determines the most efficient pathway to the destination, and routes the
data accordingly. Each router has two addresses—one for each network
that it connects. Routers are often referred to as gateways. See also
gateway .
Server
Any device on a network that provides a service. For example, a file server
stores network files and application programs and a print server sends print
data to a printer.
SNMP
Simple Network Management Protocol, the Internet standard message-
handling protocol used to monitor Internet networks and gateways.
Spooler
See print spooler .
Spooler Mapping
A NetWare command that translates the printer number used by an
application into a print queue that NetWare can understand.
Subnet
One physical network within an Internet. See also Internet .