User`s guide

Introduction
QMS CrownNet System Administrator's Guide2-2
Introduction
The chapter briefly introduces the methods of interface configuration
and then explains each of the configuration options in detail.
» Note:
If you’ve purchased an optional CrownNet NIC, it must be
installed in the printer before the interface can be configured. Refer to
your printer user's guide for installation instructions. If no instructions
are given, you must contact a QMS service technician for installation.
To find a QMS service technician near you, contact your QMS vendor
or call QMS Product Support. See appendix A, “QMS Customer
Support,” for a list of QMS world-wide service and support offices.
Changing Configuration
Settings
You can change the CrownNet interface configuration settings in the
following ways:
n CrownAdmin
CrownAdmin is available for DOS. See the chapter 3 in this man-
ual for more information.
n CrownAdmin 3
CrownAdmin 3 is available for AIX, HP-UX, Solaris, SunOS, and
Windows/Windows NT/Windows 95, OS/2, and Macintosh envi-
ronments. See the chapter 4 in this manual for more information.
n Printer control panel
For complete information on using the control panel to make con-
figuration changes, see your printer documentation.