User`s guide

TCP/IP
C-5
SNMP and TCP/IP Concepts
» Note:
Some NMSs require settings to be identified as integers rather
than as strings. If this is necessary, check the MIB for the integer
corresponding to the desired setting.
Example
This example shows how to change the printer’s default EtherTalk
connection from Both to Spooling.
1 Change the value.
Set
enterprises.qmsInc.qmsRel.qmsIF.qmsIFSetup.qmsIFApple.qmsIFAppleTalk-
Menu.altkConnType
to Spooling.
2 Make the change permanent (save it to NVRAM).
Set
enterprises.qmsInc.qmsRel.qmsIF.qmsIFAdmin.qmsIFAdminMenu.qmsIFAdmin-
ConfigStatus
to configSaveRequest.
3 Reset the printer.
Set
enterprises.qmsInc.qmsRel.qmsIF.qmsIFAdmin.qmsIFAdminMenu.qmsIFAdmin-
UnitStatus
to hardReset.
TCP/IP
Subnetting
One of the ways a single network address can span multiple physical
networks is through subnetting, which divides the host part of an
internet address into a physical network part and a host part. In other