User`s guide

Updating

CrownNet

Software

QMS CrownNet System Administrator's Manual9-18

3 After at least 5 minutes, if the printer doesn’t reboot auto-

matically, turn it off and then on again.

nn Printers with a hard disk attached reboot automatically.

nn Printers without a hard disk attached must be rebooted

manually.

nn Older printers with a hard disk may have to be turned on and

off twice.

4 Print another CrownNet configuration page (the Administra-

tion/Communications/xxxxxxxx

NIC

/CrownNet/Common/

Config Page menu, where

xxxxxxxx

is either Resident or

Optional), and check the CrownNet software version number

to verify successful installation of the upgrade.

5 If necessary, use the CrownNet configuration page you

printed before you downloaded the new software to

reconfigure the interface to its previous settings.