User`s guide

About the
Documentation
1-5
Introduction
About This Manual
This manual guides you through configuring the CrownNet interface
and using the CrownAdmin, CrownAdmin 3, CrownNet Manager,
CrownNet Print Utility for Windows, and UNIX host software. Informa-
tion is organized in the following sections:
1
Introduction
Provides an overview of the
CrownNet interface and describes the
documentation.
2
Printer
Configuration
Briefly explains the two methods of
interface configuration—the printer
control panel and remote console—
and then explains each of the
configuration options in detail.
3
CrownAdmin for
DOS
Explains how to use the CrownAdmin
software on DOS systems to access
Remote Console.
4
CrownAdmin 3
Provides an overview of CrownAdmin
3 and explains how to access and
use the on-line user’s guide. Explains
how to use the CrownAdmin software
and access Remote Console.
5
CrownNet
Manager for OS/2
Explains how to use CrownNet
Manager for OS/2 to monitor and
customize your OS/2 printing
environment.
6
CrownNet Print
Utility for Windows
Describes how to set up the QMS
CrownNet Print Utility for Windows
and how to access on-line help.
7
UNIX Utilities
Lists the supported varieties of UNIX,
identifies the main differences
between HP-UX Versions 9. x and
10.
x , and discusses the BOOTP and
RARP protocols, QMS qpr
command, supported FTP
commands, and QMS LPD.