User`s guide

NetWare
Problems
9-11
Troubleshooting
You have a problem selecting and using a print queue.
nn Print queues you select for the QMS CrownNet interface to ser-
vice should not also be serviced by a printer connected directly to
the file server. If you have a problem selecting and using a print
queue in NetWare version 2.
x or later, use the following proce-
dure to check whether a print queue is assigned to another
printer:
1 Log in to the file server as supervisor.
2 Run the NetWare SYSCON utility.
3 From the Available Topics menu, choose Supervisor
Options.
4 From the Supervisor Options menu, choose Edit System
AUTOEXEC File.
5 In the System AUTOEXEC File entry box, check to see if
these lines are present:
printer
number add queuename
spool number to queuename
If these lines are not in the AUTOEXEC file (and if the print queue
is not assigned to a printer directly attached to the file server),
you have not assigned queues to a dedicated printer and may
assign any queue(s) to a remote printer.
» Note:
These lines are not necessary to assign a print queue to a
printer directly attached to the file server.
If these lines are in the AUTOEXEC file, queuename identifies the
queue assigned to a dedicated printer. You cannot assign this
queue to a remote printer unless you delete these lines from the
AUTOEXEC file.