User`s guide

NetWare
Problems
QMS CrownNet System Administrator's Manual9-10
nn Did you assign a print queue that is not connected to a print
server?
Some print jobs pass through the print queues without printing.
nn Is the printer set up to understand the page description language
your print job uses (Administration/Communications/
xxxxxxxx
NIC/CrownNet/Common/Emulation menu, where xxxxxxxx is
either Resident or Optional)?
PCONSOLE reports that the remote printer is not connected.
nn On the print server, increase the SPX timeout values (watchdog
abort, watchdog verify, ack wait, and/or default retry).
If the print server is a dedicated PC, the NetWare SPX timeout
values should be placed in either the SHELL.CFG file or the
NET.CFG file. After changing the SHELL.CFG file, restart the
dedicated workstation or print server for the changes to take
effect, then turn off and on the printer to reconnect the print
server. Complete information about the SHELL.CFG and
NET.CFG files can be found in the NetWare documentation.
If the print server is an NLM (NetWare Loadable Module) on the
file server, use the SPXCONFG NLM to modify the SPX timeout
values. Complete information about the SPXCONFG NLM is in
the NetWare documentation.
Graphics print in the wrong format.
nn Did you include the notabs (nt) and noformfeed (nff) options in
the capture command when sending the file to the printer?
nn In the PRINTCON utility, change the File Contents for the print job
configuration to Byte Stream.
A blank page prints at the end of some print jobs.
nn If you’re using the NetWare capture or nprint command with the
formfeed option and your application automatically enables a
form feed at the end of a file, the printer ejects an extra blank
page. Use the capture or nprint command with the noformfeed
option instead. See the NetWare documentation for more
information.