User`s guide

Host Address
Files
7-15
UNIX Utilities
Download the Host Address File
1 Make sure the AdministrationlCommunications/ xxxxxxxx
NIC/CrownNet/TCPIP/Secure Files option (where xxxxxxxx is
either Resident or Optional) is disabled.
See chapter 2, “Printer Configuration” for complete information.
2 Make sure the printer's hard disk is configured correctly (see
“Identifying Hard Disks,” later in this chapter).
3 Log in to the printer as root.
4 Type cd admin↵ to change to the admin directory.
5 Type put host.eq↵ to copy the host address file to the
admin directory on the printer's hard disk.
» Note:
If there is no hard disk or if the hard disk is not correctly
configured, the following message is displayed:
Can not open
file on printer.
Example—In this example, the user has already completed steps 1-3
above.
ftp> cd admin↵
250 Chdir okay
ftp> put host.eq↵
200 PORT command okay
150 Opening connection
226 Transfer complete
local: host.eq remote: host.eq
37 bytes sent in 0.025 seconds (1.4 Kbytes/s)
ftp> quit↵
221 Goodbye
unix 14]
Restart the Printer
Once you have downloaded the host address file, turn the printer off
and back on again for the file to take effect.