User`s guide

Password Files
QMS CrownNet System Administrator's Guide7-12
Download the Password File
1 Make sure the Administration/Communications/ xxxxxxxx
NIC/CrownNet/TCPIP/Secure Files (where xxxxxxxx is either
Resident or Optional) option is disabled.
See chapter 2, “Printer Configuration,” for complete information.
2 Make sure the printer's hard disk is configured correctly.
3 Log in to the printer as root.
4 Type cd admin↵ to change to the admin directory.
5 Type put password.ftp↵ to copy the password file to the
admin directory on the printer's hard disk.
» Note:
If there is no hard disk or if the hard disk is not correctly
configured, the following message is displayed:
Can not open
file on printer.
Example—In this example, the user has already completed steps 1-3
above.
ftp> cd admin↵
250 Chdir okay
ftp> put passwd.ftp↵
200 PORT command okay
150 Opening connection
226 Transfer complete
local: PASSWD.FTP remote: passwd.ftp
37 bytes sent in 0.025 seconds (1.4 Kbytes/s)
ftp> quit↵
221 Goodbye
unix 5]
Restart the Printer
Once you have downloaded the password file, turn the printer off and
back on again for the passwords to take effect.