User`s guide

FTP (File
Transfer
Protocol)
QMS CrownNet System Administrator's Guide7-8
Notes
n The number of copies to be printed and the duplexing parameters
may be overridden by specifications within the document itself.
Refer to your printer user's guide for availability of specific fea-
tures. Also refer to your
QMS Crown Document Options Com-
mands
manual for the correct DOC syntax.
n The local system spooler, lpr(1) or lp(1), is assumed to reside
along the invoker's path.
n qpr terminates the DOCs it adds to the beginning of the file with
the command %%EndComments. DOCs that are already coded
within a file prior to printing with qpr will not be parsed as DOCs
when sent by qpr because of this terminating command.
FTP (File Transfer Protocol)
The usual implementations of FTP are designed to transfer files from
host to host. The QMS TCP/IP implementation is designed to allow
the transfer of files from a host to an FTP server in a QMS Crown
printer. This makes it easy for you to do tasks such as log on the
-R fpage lpage Specifies a range of logical pages to print. You may use “*”
(the quotation marks are mandatory) for
lpage to indicate the
end of the document. The default setting is 1 “*” (the
quotation marks are mandatory).
-S
type Selects the size of the logical page mapped to the physical
sheet of paper to be used by the current print job. The values
of
type are the same as for -i.
-t Prints the document in tumble duplex mode (if supported by
your printer).
-tr
option Turns the trailer page on or off for the current print job. This
option can be on or off.
-ts
option Specifies the input bin to be used for the trailer page. Bins
are the same as for -I. This option must be used with -tr.