User`s guide

QMS qpr
Command
QMS CrownNet System Administrator's Guide7-6
-f title Changes the title of the document (file) on the header page
to
title . The default title is the name of the file.
-F
left top Specifies the offsets of the logical page within its page spot.
Offsets are positive or negative displacements from the
edges in decipoints (
1
/720").
-g
fn cycle unit Requests that filename fn (a printer-resident file) be
compiled and displayed as the background image of the job.
If
cycle is “1” the background image prints only on the first
page of the job. If cycle is “*” the background image is
repeated for each page of the job. If unit is “sheet”
(background image to a sheet face) the background job is
mapped onto the physical sheet using formats specified by
the image file. If
unit is “page” (background image to a
logical page), the background job is mapped onto the logical
page using formats specified by the job.
-G
col row sp
order
Determines the number and size of page spots per sheet
(c
ol is the number of columns per sheet, row is the number
of rows per sheet, and
sp is the space between columns),
and the logical order in which logical pages should be placed
within the page spots.
-h
option Turns the header page on or off for the current print job.
option can be on or off.
-H
source Specifies the input bin to be used for the header page. Bins
are the same as for
-I.
-i
type Identifies the physical size of the paper supported by the
printer and/or controller.
type can take the following values:
Letter, Legal, Ledger, Executive, A5, A4, A3, B5, and B4.
-I bin
[I is a capital i]
Identifies the number of the input bin containing the paper to
be used: 1, 2, 3, 4, manualfeed, or “*” (the quotation marks
are mandatory). The “*” requests any available input bin of
the specified paper size (-i type ) except the manual feed
tray.
» Note: Available input bins vary, depending on your
printer.