User`s guide

Introduction
QMS CrownNet System Administrator's Guide7-2
Introduction
The QMS UNIX Host Software supports many varieties of UNIX,
including the following:
n AIX Version 4.1
n HP-UX Versions 9.
x and 10. x
n Sun Solaris Version 2.5
n SunOS Version 4.1.2
n SCO Build 10
n SGI Version 5.3
n SYS V Release 3
This chapter lists the main differences between HP-UX Versions 9.
x
and 10.
x , describes the BOOTP and RARP protocols (which allow
you to set the printer's Internet address), explains how to use the
QMS qpr command to print files, provides the information you need to
use the QMS implementation of FTP (File Transfer Protocol), and dis-
cusses QMS LPD (Line Printer Daemon) support.
Setting the Internet Address
The printer's Internet (network) address is in the format
xxx.xxx.xxx.xxx . It must be set, and it must be unique. There are three
ways to set the Internet address:
n The Administration/Communications/
xxxxxxxx NIC/Crown-
Net/TCPIP/Internet Address submenu (where
xxxxxxxx is either
Resident or Optional), explained in chapter 2, “Printer Configura-
tion.”
n The bootp protocol, explained in the following section. “The bootp
Protocol.”
n The rarp protocol, explained later in “The rarp Protocol.”