User`s guide

Using CrownNet
Manager
5-7
CrownNet Manager for OS/2
hardware address (Administration/Communications/Networkx/
CrownNet/Common/HW Address menu). The factory-default
hardware address is 080086
xxxxxx
. See chapter 2, “Printer Con-
figuration,” for more information on hardware addresses.
n Status—The status may be identified as OK, Internal error,
Printing, or No response.
No response is reported if the printer is off, the protocol is dis-
abled, or the printer name has changed.
» Note:
CrownNet Manager requires OS/2 Presentation Manager for its
status display.
Refreshing the Status Display
Normally, CrownNet Manager for OS/2 refreshes the status display
every minute. However, you can choose Refresh to update the display
immediately.
Switching Between the Status and Log Files
When the log file is displayed, from the Status menu choose Refresh
to switch to a display of the status file.
Viewing the Status File
To display more information about a specific CrownNet printer, use
the following procedure:
1 In the status display, select a printer.
2 From the Status menu choose Details.
The CrownNet Port Details dialog box lists the following informa-
tion about the CrownNet printer: network, port, status, product,
software version, and software date.
3 When you are finished, click OK to return to the CrownNet
Manager for OS/2 window.