User`s guide

Using CrownNet
Manager
5-5
CrownNet Manager for OS/2
Using the Install Menu
Use the Install menu to register newly attached CrownNet printers:
1 From the Install menu choose Install.
All available CrownNet printers (those operating and on line) are
displayed in the Installation of CrownNet Ports dialog box. They
may be identified by their default hardware addresses
(QMS_080086
xxxxxx ). Hardware addresses are set in the
Administration/Communications/Networkx/CrownNet/Common/
HW Address menu. See chapter 2, “Printer Configuration,” for
more information.
2 Select a CrownNet printer or use the Select All button to
select all listed printers.
3 Choose Install.
Using the Logfile Menu
CrownNet Manager for OS/2 updates a log file, named CROWN-
MAN.LOG, each time a significant event occurs (for example, a file is
printed). This file is stored in the Crown directory on your PC in plain
text format.
» Note:
The following line in the STARTUP.CMD file specifies the name
and location of the log file:
set crownman=c:\crown
This line must be placed after the line
net start server
Erasing the Log File
From the Logfile menu choose Erase to erase the log file.
Printing the Log File
Open the log file in any text editor and then print it as you would nor-
mally print a file.