User`s guide

Using CrownNet
Manager
QMS CrownNet System Administrator's Guide5-4
Using CrownNet Manager
The CrownNet Manager for OS/2 shows the current status of each
installed port of the attached printer (for example, if a printer error has
occurred). If many printers have been installed, you can scroll through
the list by using the scroll bar or the PgUp/PgDn keys.
Each port of a printer is displayed as QMS_
hwaddress, where
hwaddress is the CrownNet interface’s hardware address
(Administration/Communications/Networkx/CrownNet/Common/HW
Address menu). The factory-default hardware address is
080086
xxxxxx . See chapter 2, “Printer Configuration,” for more
information on hardware addresses.
The following menus are available in the action bar:
n Help
n Install
n Logfile
n Remove
n Status
Using the Help Menu
Use the commands in the Help menu to access detailed on-line help
for the menus, commands, and actions available in CrownNet Man-
ager for OS/2 as well for the fields in the status and log file displays.
1 From the Help menu choose Help index...
2 Double-click on the appropriate topic.
3 When you have finished using help, close the help window
as usual.