User`s guide

Edges of the copy
are cut off
Make sure you’re centering documents at the
top of the scanner glass and that the scan
size setting (“Scan Size” on page 12) is cor-
rect. Also, keep in mind that the printer’s
maximum imageable area is 8.11” x 10.61”
for letter-size media and 200 mm x 287 mm
for A4.
Image quality of
copies is not optimal
Clean the scanner glass: dampen a lint-free
cloth with alcohol or a mild detergent and
wipe the glass clean.
If you’re copying transparencies, you should
purchase the optional transparency adapter,
and make sure you’ve enabled the
Transparency option in the printer’s control
panel.
If you’re scanning at 150 dpi, some printed
materials, such as magazines, cause moiré
patterns. To remove these patterns, change
the scan resolution to 200 or 300 dpi (choose
Copier/Copy Mode/Select Mode/Custom and
then Copier/Copy Mode/Custom Config/
Scan Resolution/200 or 300).
If copy colors are dramatically different from
the colors in the original document, see
chapter 4, “Copy Quality,” for information on
adjusting the appearance of copies.
Check the printer user’s guide for additional
troubleshooting tips for improving printout
quality.