User`s guide

Connecting the Power Cord
The power cord connector is located at the rear of the printer. The
power switch is located at the lower right of the printer.
CAUTION: Make sure that the printer power switch is turned off
(the O is pressed down).
1. Align the power cord with the connector on the rear of the
printer, and plug the power cord into the connector (fig. 2.15).
2. Connect the opposite end of the power cord to a grounded AC
outlet.
3. Turn on the printer (press | down). After a brief warm-up,
maximum 2 minutes, the printer produces a start-up page.
Fig. 2.15 Connect the Power Cord
Chapter 2
Printer Installation 2-19