User`s guide
Header Page A special page printed before a print job that identifies the print
job and helps users sort out the print jobs in the printer’s output tray. Header
pages contain the following information: printer name, selected interface,
job identification, title, submitting computer, job owner, routing message,
start time, application used, creation time, copyright date, version number,
job submission time, job start time, number of sheets printed, and printer
product name/logo. The header page also lists any specified DOC
commands. See the optional QMS Crown Document Option Commands
manual, available from your QMS vendor, for complete information.
HP-GL (Hewlett-Packard-Graphics Language) HP-GL is the
programming language upon which the HP plotters are based. This
emulation is a resident emulation on your QMS 860 Print System.
HP PCL (Hewlett-Packard Printer Control Language) HP PCL
is the printer control language native to the HP Laser Jet Series II and IIP
printer. Your QMS 860 Print System has a resident HP PCL emulation.
Icon A pictorial symbol indicating a printer function.
Interface A shared boundary defined by common physical interconnection
characteristics, signal characteristics, and meanings of interchanged signals.
Interface Cable A special cable used to connect the printer to the computer
so they can communicate.
Interface Card Internal hardware used to link a workstation or printer
physically to a LAN cable. Ethernet and Token-Ring are typical interface
cards.
Interface Port The printer comes with three interface ports: serial, parallel,
and AppleTalk located on the back panel. The cable that attaches the
computer to the printer must be plugged into the proper interface port. See
I/O cable.
Internal Fonts Fonts permanently stored in the printer’s memory. Also
called resident fonts.
G-6 Glossary