User`s guide

SELECT
then NEXT
END JOB MODE
OPTION
Access End Job Mode and
advances to the selected
End Job Mode option. OP-
TION is the End Job Mode
option you want (QMS
EOD, HP EOD, or
NONE.
SELECT PARALLEL
(or
SERIAL)
END JOB MODE
Returns to Parallel or Serial
/ End Job Mode.
ONLINE/
OFFLINE
SAVE CHANGES?
NO
Exits from the End Job
Mode menu and prompts
you to save changes.
NEXT SAVE CHANGES?
YES
Advances to the next save
changes option.
SELECT IDLE Saves the changes and re-
turns the printer to idle.
ONLINE/
OFFLINE
IDLE Turns on the indicator and
puts the printer back on
line.
Adding an EOD Command to Your File
When adding an EOD command to your file use the syntax for the
selected EOD command exactly as written (the command’s syntax
is case sensitive).
NOTE: represents the escape character. (The decimal value for
the escape character is 027, and the hexadecimal value is
1B.) How you enter the escape character depends on
your application. Some applications allow you to press
and hold the ALT key and then type 027 to enter the
escape character, while others allow you to type certain
character sequences to represent the escape character.
Appendix F
F-24 Additional Technical Information