User`s guide

NOTE: If you print both serial and parallel protocol jobs, then
you must set the end job mode for each protocol.
Wait for the printer to go idle, and then press the control panel keys
in the order shown in the following instructions to access the End
Job Mode option. The printer responds by displaying a status
message in the message window. You may need to press the Next
key one or more times to advance through the list of selections or
options.
Control
Panel Keys
Message Window Printer Response
ONLINE
OFFLINE
IDLE Takes the printer off line.
The Online/Offline indica-
tor goes off.
MENU CONFIGURATION
OPERATOR CON-
TROL
Accesses the Configura-
tion menu.
NEXT CONFIGURATION
ADMINISTRATION
Advances through the
Configuration menu selec-
tions.
SELECT ADMINISTRATION
COMMUNICATIONS
Accesses the Administra-
tion / Communications
menu.
NEXT COMMUNICATIONS
PARALLEL or
SE-
RIAL
Advances through the
Communications menu se-
lections until the protocol
you want displays.
SELECT
then NEXT
PARALLEL
(or
SERIAL)
END JOB MODE
Accesses the Communica-
tions / Parallel or the Com-
munications / Serial menu
and displays the End Job
Mode option.
Appendix F
Additional Technical Information F-23