User`s guide
White or Light Lines
1. Remove the toner cartridge and rock it as you do before
installing a new cartridge. This redistributes toner inside the
cartridge. Reinstall the cartridge.
2. If step 1 does not solve the problem, install a new toner
cartridge.
Light Image (Entire Page)
1. Increase the print density by adjusting the print density control
lever inside the printer to the thick end of the wedge-shaped
scale.
2. Remove the toner cartridge and rotate it as you would when
installing a new cartridge. This redistributes toner inside the
cartridge. Then, reinstall the cartridge.
3. Install a new toner cartridge.
Dark Image (Entire Page)
1. Decrease print density by adjusting the print density control
lever inside the printer to the thin end of the wedge-shaped
scale.
2. If step 1 does not solve the problem, install a new toner
cartridge.
Black Image (Entire Page)
1. Install a new toner cartridge.
Chapter 9
Troubleshooting 9-17