User`s guide

IDLE INPUT
PRINTING
Indicates that the printer is on line and print-
ing jobs that are already in the queue; no new
jobs are arriving at the communication inter-
faces.
INITIALIZING Indicates that system is getting ready to go
on line.
PAPER JAM Indicates that media has jammed either
while being pulled from the input bin, pass-
ing through the printer, or exiting from the
printer into the output bin.
PAPER SIZE
MISMATCH
Indicates that the size paper selected for
input bin 1 (multipurpose tray) is not the size
paper currently being fed in the tray. If the
printer supports the paper size you want,
insert the correct paper size in the multipur-
pose tray. If the printer does not support the
paper size you want, select the universal
paper size to clear the error. See chapter 4,
the “Operator Control / Multipurpose Sz”
section, for more information on multipur-
pose size.
PRINTING
STATUS
Indicates that the Status Page key has been
pressed. The message clears after the status
page prints.
PUT SIZE
PAPER IN INPUTBIN
BIN
Indicates that the displayed paper cassette or
tray is empty. Refill the paper cassette or
tray with the specified paper size.
TEST PRINT Indicates that a test print page is being
printed.
TONER ABSENT Indicates that the toner cartridge is not in-
stalled.
TONER OUT Indicates that the printer’s toner cartridge is
empty.
WAITING FOR
IDLE
Indicates that an active print job is in proc-
ess, so access to the menu is not allowed
Chapter 9
9-4 Troubleshooting