User`s guide

7. Place the optional interface board on the optional interface
connector at the back of the printer and push gently to seat it
properly. Secure the optional interface board to the printer
with the four screws provided in the kit (fig. 8.27).
8. Reconnect all interface cables and the power cord, and then
turn on the printer.
Using an Optional Network Interface
Once an optional network interface is installed, refer to the
interface’s user’s guide for complete information on connecting the
printer to the network.
For information on using the interface to print, see the QMS Crown
Network Notes and your network documentation.
Fig. 8.27 Secure Optional Interface Card to Printer
Chapter 8
8-43 Printer Options