User`s guide

Replacing the Printer and Controller Board
Covers
The printer and controller board covers must be reinstalled after a
SIMM or an optional network interface is installed.
CAUTION: Eliminate static by putting on the anti-static wristband
provided with your printer option accessory kit and grounding it to
any base metal surface (such as the bottom of your telephone).
Avoid walking around after grounding yourself because your body
may build up static and you will have to repeat the grounding
process.
1. Place the metal cover on the controller board, and replace the
15 screws you removed earlier (fig. 8.19).
..................
..................
..................
..................
.......................
.......................
...................
...................
...................
...................
Fig. 8.19 Replace Controller Board Cover
Chapter 8
Printer Options 8-33