User`s guide

3. Remove jams from the fixing assembly area by pulling in the
direction of the arrow pointing away from the printer (fig.
5.16). Pull the print media in the opposite direction of that
arrow (toward the printer) only if the end of the paper has
passed completely through the fixing assembly.
NOTE: If the end of the print media has not passed completely
through the fixing assembly area, and the print media is
pulled toward the inside of the printer, infused toner may
adhere to the inside of the printer and stain the backs of
the next pages being printed.
Fixing
Assembly
Print
Delivery
Guide
Fig. 5.16 Clear Assembly Area Jam
Chapter 5
Daily Operations 5-25