User`s guide

Def Resolution (default 600 dpi; range 300 dpi, 600 dpi)
Sets the print engine’s default resolution.
Gamma Correction (default 0; range 0-3)
Sets the print engine’s gamma correction. See chapter 6, “Print
Quality,” for more information on gamma correction.
Enable Buzzer (default off; range off, on)
On Enables the print engine warning
buzzer to sound when an error is en-
countered.
Off Disables the print engine’s warning
buzzer.
Page Recovery (default on; range off, on)
On Reprints a print job from the page that
an error or paper jam occurs on.
Off Does not reprint a print job when an
error or jam occurs.
Toner Out Act. (default continue; range continue, stop)
Continue Continues to print after the toner out
error message is displayed.
Stop Stops printing when the toner out er-
ror message is displayed.
Man Feed Timeout (default 060; range 000-300)
Determines how long, in seconds, to wait for the next sheet of paper
to be placed into the manual feed tray. If the timeout occurs, the
manual feed job is canceled. The multipurpose tray, when accessed
by a PostScript emulation operator as bin 0, is the manual feed tray.
Chapter 4
4-48 Printer Configuration