User`s guide

pen color (default 8; range 1-8)
Administration / Emulations / HP PCL 4 Maintains default
font, point size, and attribute used in PCL emulation mode. The
QMS Crown Technical Reference Manual, which is an optional
purchase available from your QMS vendor, contains more detailed
information on this emulation.
Default Font (default Courier 12; range Courier 12, Courier 12 Bld,
Courier 12 Itl, Courier 10, Courier 10 Bld, Courier 10
Itl, Lineprinter)
Sets the printer’s default font.
Symbol Set (default Roman 8; range Roman 8, PC-850, PC8-US,
PC8-DN, ECMA-94, HP German, HP Spanish, ISO 2,
ISO 4, ISO 6,ISO 10, ISO 11, ISO 14, ISO 15, ISO 16,
ISO 17, ISO 21, ISO 25, ISO 57, ISO 60, ISO 61, ISO
69, ISO 84, ISO 85)
Lists the symbol sets available with the HP PCL4
emulation.
Lines Per Page (default 60; range 5-128)
Number of lines on the printed page.
Retain
Temporary
(default off; range off, on)
Indicator that resets PCL to its default state at the end
of each PCL print job.
Off Does not reset PCL to its default state
at the end of each PCL print job.
On Resets PCL to its default state at the
end of each PCL print job.
Line
Termination
(default CR=CR LF=LF; range CR=CR LF=LF,
CR=CR+LF LF=LF, CR=CR LF=CR+LF, CR or LF
= CR+LF)
Indicator that defines the print position after a carriage
return or line feed.
Chapter 4
Printer Configuration 4-35