User`s guide

Plotter (default 7550A; range 7550A, 7475A, 7470A,
ColorPro)
HP-GL plotter type.
Scaling Percent (default 100; range 001-150)
Percentage to reduce or enlarge an image.
Origin Image offset from the plotter’s origin in 0.01"
increments.
X direction (default 0000; range 0-8500 [8.5"])
Y direction (default 00000; range 0-11000
[11.00"])
Reverse Image (default off; range off, on)
Inverse of an image.
Off Prints black image on white back-
ground.
On Prints white image on black back-
ground.
Enhanced Mode (default off; range off, on)
Indicator that sets the resolution of a downloaded
character set.
Off Uses standard resolution.
On Turns on enhanced resolution.
Expand Mode (default off; range off, on)
Indicator that expands default scaling points P1 and P2,
hard-clip plotting range, and maximum plotting area.
Off Uses default scaling points, plotting
range, and plotting area.
On Turns on expand mode.
Paper Type (default A; range A, A4, B, A3)
Original image’s paper size.
A Letter (8.5" x 11")
B 11" x 17"
Chapter 4
Printer Configuration 4-33