Specifications

,%
(
(
5#&
This option allows you to adjust the horizontal and vertical placement of printed
images.
To check image alignment, print a standard status page (Print Status button). When
the printer is placing images properly, the alignment angle bar in the lower-left corner
of the status page is 0.5"/12.7 mm from the left and bottom edges of the page. If the
angle bar is off, use the Administration/Engine/Image Alignment option to align the
image horizontally and vertically in pixel increments (1/300" or 0.08 mm).
»Note:
Engine constraints may limit the accuracy of pixel alignment.
46 *00
; *00
Menu
Administration/Engine/Image Alignment/Horiz Offset
Purpose
Adjusts the horizontal placement of the image on the page.
Choices
000-300 (0.00"/0 mm-1.00"/25.4 mm)
Default
100 (0.33"/.84 mm)
Notes
Values above 100 move the image to the right.
Values below 100 move the image to the left.
Menu
Administration/Engine/Image Alignment/Vertical Offset
Purpose
Adjusts the vertical placement of the image on the page.
Choices
000-300 (0.00"-1.00")
Default
100 (0.33"/.84 mm)
Notes
Values above 100 move the image down.
Values below 100 move the image up.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]