Specifications


'
"
Disk swapping gives your printer virtual memory capability for all memory clients
through the creation of a “swap file” on the printer’s hard disk. The printer uses this file
as an extension of its memory. As the physical RAM fills, the printer can swap the con-
tents to the hard disk file to allow more space. This file swapping between disk and
RAM occurs at various times throughout the printing process and is completely trans-
parent.
»Note:
The printer must have a hard disk to take advantage of this feature. If there is
no hard disk installed, this menu does not appear.
!##!#
The manual configuration menu allows you to finely adjust memory clients to your par-
ticular printing needs.
Menu
Administration/Memory/Enable Disk Swap
Purpose
Enables or disables disk swapping.
Choices
Off
—
Don’t enable disk swapping.
On—Enable disk swapping.
Default
On
Notes
If disk swapping is enabled and the hard disk is removed or not turned on,
the printer automatically resets to the factory defaults.
The printer must be restarted for changes to the Enable Disk Swap and
other memory menus to take effect. You can either let the printer restart
automatically after you save the change and exit from the configuration
menu, or you can wait for the change to take effect the next time you
manually turn on the printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]