Specifications


%# '&

This submenu allows you to allocate the printer’s memory (RAM) among the various
memory clients. The flexibility of defining memory available to clients allows experi-
enced users to optimize the printer's performance according to a given set of condi-
tions.
This section briefly describes each of the memory submenus and the memory clients.
See chapter 3, “Additional Technical Information,” for more detailed information on the
printer’s memory and what benefits, if any, may result from adding memory to each cli-
ent.
To find out how memory is currently allocated, print a status page using the Print Sta-
tus button on the control panel or check each client individually in the configuration
menu.
##
»Note: The Quick Config menu appears only if there is no hard disk installed in the
printer or if the Administration/Memory/Enable Disk Swap option is turned off.
Menus
Administration/Memory/Quick Config/300 dpi
Administration/Memory/Quick Config/600 dpi
Administration/Memory/Quick Config/1200 dpi
Purpose
Configures the memory clients to the settings which allow the printer to
perform best for each resolution.
Choices
Legal, Letter/A4, 11x17
Notes
The printer is automatically restarted after this menu change.
The results of Quick Config depend on the amount of memory installed,
the resolution used for printing, and the media size.
Under the Quick Config option documented on the advanced status page
you will see “****”. This option isn’t user-definable. Quick Config
configures memory depending only on the resolution and paper size.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]