Specifications

,$#

!
Menu Administration/Emulations/HP-GL/Expand Mode
Purpose Defines a larger imageable area which affects the default placement of
the scaling points P1 and P2.
Choices On—Turn on expand mode
Off—Use default scaling points, plotting range, and plotting area.
Default Off
Notes The available range of plotter units for a particular paper size is only
partially determined by setting the Expand Mode to On. When the printer/
plotter senses the paper size it automatically sets the hard clip limit to
15mm on three sides and 39 mm on the fourth. If Expand Mode is On,
then the hard clip limits are set to 5mm on three sides and 29 mm on the
fourth side. This is what allows you to define a larger imageable area.
The HP-GL emulation senses the paper type if the paper type is set to
Scale to Paper. It is also possible to have the HP-GL emulation use a
particular paper size by setting Original Paper Type through the control
panel or by using a Document Option Command.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]