Specifications

#

!##$01 $0 
Sets the minimum number of kilobytes of system memory allocated to the parallel
interface.
 #
Sets the number of seconds the interface waits for data from the host before terminat-
ing a spooled print job.
,
Sets the number of data bits transmitted per character.
Menu
Administration/Communications/Parallel/Min K Spool
Choices
00000-99999
Default
00015
Notes
This value must be less than K Mem For Spool in the administration/
memory submenu.
A 00000 value does not turn off the spooling buffer for the parallel
interface. If the value is set to 00000, the printer calculates the Min K
Spool automatically at initialization.
The printer must be restarted for changes to the Min K Spool menu to
take effect. You can either let the printer restart automatically after you
save the change and exit the configuration menu, or you can wait for the
change to take effect the next time you manually turn on the printer.
Menu
Administration/Communications/Parallel/Spool Timeout
Choices
00000-99999
Default
00030
Menu
Administration/Communications/Parallel/Data Bits
Choices
7 bits, 8 bits
Default
8 bits
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]