Specifications

#
%# 
"&
Use the Administration/Communications/Parallel menu to set the parallel interface val-
ues used for printer-host communications.
!
The parallel interface supports Centronics parallel communication as well as IEEE
1284 bidirectional parallel communication.
+#
Sets the parallel interface emulation.
Menu
Administration/Communications/Parallel/Mode
Choices
Interactive—Establish two-way communication between the host and the
printer.
Noninteractive—Establish one-way communication from the host to the
printer.
Disabled—Turn off parallel communication with the host. The printer
stops accepting print jobs over the parallel interface.
Default
Noninteractive
Notes
The printer must be restarted for changes to the menu to take effect. You
can either let the printer restart automatically after you save the change
and exit from the Configuration menu, or you can wait for the change to
take effect the next time you manually turn on the printer. See chapter 3,
“Additional Technical Information,” for a discussion of the different modes.
Menu
Administration/Communications/Parallel/Emulation
Choices
ESP, Hexdump, PostScript, PCL5e, HP-GL, Lineprinter
»Note:
Other optional emulations, such as LN03+, QUIC,
TIFF, CALS, CCITT, and CGM, also appear, if installed.
Default
ESP
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]