Specifications

#
%# )
#-

"
Menu Administration/Communications/Serial/Baud Rate
Purpose Sets the rate data is transmitted (bits per second) over the serial
interface.
Choices 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 (bits/sec.)
Default 9600 (bits/sec.)
Notes Baud rates of 19200 and 38400 require hardware flow control
(Administration/Communications/Serial/Hdwe Flow Ctl menu).
Menu Administration/Communications/Serial/Parity
Purpose Sets the check bit used to identify data transmission errors.
Choices None, Odd, Even
Default None
Notes The printer’s parity setting must match that of the host or application.
Use the Administration/Communications/Serial/Ignore Parity menu to
specify how the printer handles parity errors.
Menu Administration/Communications/Serial/Ignore Parity
Purpose Specifies how the printer should handle parity errors.
Choices Off—Ignore parity errors. The printer prints its best interpretation of the
character(s) affected by the error.
On—Don’t ignore parity errors. The printer replaces the character(s)
affected by the error with a question mark.
Default Off
Notes Use the Administration/Communications/Serial/Parity menu to set parity.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]