Specifications

#
%# '
!##$01 $0 
 #
Menu Administration/Communications/Serial/Min K Spool
Purpose Sets the minimum number of kilobytes of system memory allocated to the
serial interface.
Choices 00000-99999 (KB)
Default 00015 (KB)
Notes This value must be less than K Mem For Spool.
A 00000 value does not turn off the spooling buffer for the serial interface.
If the value is set to 00000, the printer calculates the Min K Spool
automatically at initialization.
The printer must be restarted for changes to the Min K Spool menu to
take effect. You can either let the printer restart automatically after you
save the change and exit the Configuration menu, or you can wait for the
change to take effect the next time you manually turn on the printer.
Menu Administration/Communications/Serial/Spool Timeout
Purpose Sets the number of seconds the interface waits for data from the host
before terminating a spooled print job.
Choices 00000-99999 (sec.)
Default 00030 (sec.)
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]