Specifications

#

""&
!
# 
Menu Administration/Communications/Serial/Mode
Purpose Enables or disables the serial port.
Choices Interactive—Establish two-way communication between the host and the
printer.
Noninteractive—Establish one-way communication from the host to the
printer.
Disabled—Turn off serial communication with the host. The printer stops
accepting print jobs over the serial interface.
Default Interactive
Notes The printer must be restarted for changes to the Mode menu to take
effect. You can either let the printer restart automatically after you save
the change and exit the Configuration menu, or you can wait for the
change to take effect the next time you manually turn on the printer.
Menu Administration/Communications/Serial/Emulation
Purpose Sets the serial interface emulation.
Choices ESP, Hexdump, PostScript, PCL5e, HP-GL, Lineprinter
»Note:
If installed, these optional emulations may also appear: CALS,
CGM, LN03+, QUIC, TIFF.
Default ESP
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]