Specifications

*+#$

%# &
"$
Options in the Operator Control menu allow you to configure whether or not an input-
bin will be available for chaining from another inputbin.
Default
On
Notes
Use the Operator Control/Inputbin menu to set the default inputbin. Make
sure that the three inputbins use the same size paper.
When chaining “on any” and duplexing, the printer will chain to a similar
size paper (for example, letter to A4) but not to the large paper sizes—
11"x17" and A3. This is because these large sizes are fed through the
printer in a different printing order than the smaller sizes. When these
restrictions occur on chaining on any, the printer will prompt you to add
the default paper size to any tray. The custom tray chaining
“on any” for large-format paper will not occur unless there is another
custom tray with the same paper size or a standard tray with A3 or
11"x17" paper.
Menu
Operator Control/Chain Option/Multipurpose
Choices
On—Allow media to be pulled from the multipurpose tray (1) if necessary.
Off—Don’t allow media to be pulled from the multipurpose.
Default
On
Notes
The Operator Control/Chain Option menu must be set to On before the
setting in this menu takes effect.
Menu
Operator Control/Chain Option/Upper
Choices
On—Allow media to be pulled from the upper inputbin (2) if necessary.
Off—Don’t allow media to be pulled from the upper inputbin (2).
Default
On
Notes
The Operator Control/Chain Option menu must be set to On before the
setting in this menu takes effect.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]