Specifications

%#
%# )
To exit from the character selection process, move the cursor to the last character of
the input field (the character farthest to the right) and press the Select button, or move
to the first character of the input field (the character farthest to the left) and press the
Menu button.
When you exit, the printer verifies character information and confirms it in the mes-
sage window. If character information is valid, you’re returned to the previous menu; if
it’s invalid, you’re returned to the input field. Press the Menu button to cancel any
changes to the character information.
If the current character information is longer than the value that you need to enter,
replace each extra character with a space. The printer interprets a space at the end of
character information as a blank.
 
To change the number of copies, press the control panel buttons in the order shown in
the following table. The printer responds by displaying a status message or configura-
tion menu in the message window. An underline indicates the current input character
in the message window.
»Note:
You may need to press the Next button more than one time to advance through
the list of selections or options.
Press this
button
to... The message window
reads...
Online
Turn off the Online indicator and ready the
printer for configuration.
IDLE
Menu
Access the configuration menu.
CONFIGURATION
OPERATOR CONTROL
Select
Access the Operator Control/ Copies menu
OPERATOR CONTROL
COPIES
Select
Access the Copies menu.
COPIES
0
01
Select
Move the cursor to the next digit.
COPIES
00
1
Next
(2 times)
Increase the digit to 2.
COPIES
021
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]