Specifications

##$:

.
'

The following power cord requirements are in effect for the 220v QMS 3260/4032 Print
System.
»Note:
In compliance with UL guidelines, “The appliance inlet is considered to be the
main disconnect device. A socket-outlet shall be installed near the equipment and
shall be easily accessible.”
+&
 WARNING! This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate
measures.
ACHTUNG! Dies ist ein Klasse A Produkt. In geschlossenen Räumen kann dieses
Produkt Interferenzen erzeugen. Bitte beachten Sie in diesem Fall entsprechende
Vorsichtsmaßnahmen.
 
This manual was written and formatted in FrameMaker. The illustrations were created
in Adobe Illustrator. Typefaces chosen are Benguiat, Courier, Tekton, and Helvetica.

Minimum
0.75 mm
2
Minimum
H05 VV - F

The male plug is certified in the country in which the equipment is to be
installed, and the female plug is an IEC 320 connector.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]