Specifications

#5#
#%# $#
# &
&
If for any reason, you need to change the image alignment, you can do so in several
different ways:
 Adjust the margins or page size through your application.
 Use the printer’s control panel (Administration/Engine/Image Alignment menu).
 Use the PostScript translate and scale operators to reduce image size and
change its placement on the page.
!
Margins are set through your application. Some applications allow you to set custom
page sizes and margins while others have only standard page sizes and margins from
which to choose. If you choose a standard format, you may lose part of your image
(due to imageable area constraints). If you can custom-size your page, use those
sizes given for the imageable area for optimum results.
!"*#"*
Ensure that the media size matches the tray size (for example, letter/A4 media must
be loaded only when the tray is set to letter/A4 size). Since the tray sends a media
size signal to the printer controller, using a wrong size media could cause a media
jam, incorrect positioning of the image, or a clipped image. Also, see chapter 3,
“Advanced Printing Features,” in the
Operation manual for information on the amount
of memory needed to print on each media size.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]