Specifications




This chapter begins by listing and describing the different ways you can configure your
printer to meet your special printing needs.
The next section describes how to use the printer control panel to access the configu-
ration menu and how to make configuration changes.
The rest of the chapter provides basic printer configuration information about some of
the configuration menu options. The QMS
CrownNet Interface System Setup Guide
(on the QMS Software Utilities CD-ROM) contains the CrownNet submenu configura-
tion information for the Ethernet interface. In both guides, menu features are grouped
according to task. Each feature is introduced, then a table describes the feature’s
location in the configuration menu, the available choices for that feature, and the fac-
tory default (the value set at the factory).

You have six ways to configure your printer to meet your printing needs:
 Through the printer driver (accessible through the application)
 Through the printer control panel
 Through the CrownAdmin network utility
 Through the CrownView printer webpage
 Through Document Option Commands
 Through Remote Console in a telnet session

Using your application is the best way to control your printer since most printing is
done on a per-job basis. This helps prevent confusion in network environments and
saves you from making changes at the printer control panel.
Applications use printer drivers to send appropriate commands to the printer for
requested tasks. If your application doesn’t have a QMS 3260/4032 Print System
driver, you can install the driver from the QMS
Software Utilities CD-ROM or download
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]