Specifications

%

=/ 0 9/:
»Note: FTP works only when the printer is on line and the message window displays
IDLE.
Use File Transfer Protocol (ftp) on the host, if a TCP/IP connection is available to the
printer, to copy the files from the printer’s hard disk to the host as follows:
1 Type ftp
printer-name (where printer-name is either the IP address of
the printer or its corresponding host name).
2 If your printer has a CrownNet or a DECnet interface, follow these steps.
a When prompted for a user id, enter admin as the user name and give the
appropriate password, if required.
b At the ftp> prompt, type bin↵ to use binary mode for the download
procedure.
c Type
get SYS:/admin/acc1.job acc1.job↵
get SYS:/admin/acc.pap acc.pap↵
get SYS:/admin/acc.sta acc.sta↵
»Note:
If multiple Job Accounting files are used, each of the ACCx.JOB files
should be copied. (x is the number of each subsequent Job Accounting file.)
3Exit ftp.
Type quit↵
+#"04
After the accounting files are stored on your host, you can create your own filters (pro-
grams) based on your specific requirements using the file and record descriptions
shown earlier in this chapter.
#((
»Note: Accounting files downloaded with Crown Printer Auditor (CPA) are
automatically decoded. The following information applies to accounting files
downloaded via FTP.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]