Specifications

CrownNet Setup
CrownAdmin 3
QMS 3260/4032
Troubleshooting
Config. Menus
Support Info.
Main
CrownNet Admin.
Printer Jams
Print Quality
Consumables
Printer Care
Specifications
Printer Features
14 of 21
?
Index
Chaining Output Bins
This menu option allows you to select chaining for the output bins. When
your print jobs exceed the capacity of one output bin the job is continued
on the next bin and then the final bin until all are full (2000 sheets).
When all three bins are full the printer displays
X OUTPUT BIN FULL
where
X
is the name of the selected output bin. The default names for the
three bins are Top-Stack, Center-Stack, and Bottom-Stack. Of course you
have the option of changing the names of any or all of the output bins.
Unloading the Output Bins
At any time during active printing you can remove you jobs from the output
bins by pressing the Unload button on top of the HCOS. The printer will
bring the bins to the top-stack position after completion of a set and stop
Menu
Operator Control/Output Finishing/Chain Outputbins
Choices
On—Switch to the next outputbin with the same size and type of
paper when the default outputbin is full.
Off—Don’t chain outputbins
Default
Off