Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 5-13

Release Version 11-97

Primary Fault Isolation Procedures

5.4 Vertical Band Deletions continued

Step Actions and Questions Yes No

FUSER INSPECTION

1. Generate another Solid Black Test Print and switch OFF

printer power when the print is halfway through the Fuser.

2. Open the Left Upper Cover.

3. Examine the paper areas before the image enters the

Fuser and after the image exits the Fuser.

Is the image on the paper normal before it enters the

Fuser, but there are vertical band deletions visible when it

exits the Fuser?

Replace the

Fuser Assem-

bly (RRP 6.1)

Go to Suspect

Components