Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 10-113
Release Version 11-97
Removal and Replacement Procedures
RRP 7.4 Offset Motor (PL 9.1)
Removal
1. Remove the Fuser Full Cover
(
RRP 1.1
)
.
2. Remove the two screws securin
g
the Motor to the Offset Assembl
y
.
3. Lift the Motor off of the Assembl
y
and free the Motor arm from the Offset Roll Rack.
4. Disconnect J209 from the Offset Motor.
Replacement
1. Insert the Motor arm into the Offset Roll Rack.
2. Reconnect J209 to the Offset Motor.
3. Reinstall the Offset Motor onto the Offset Assembl
y
.
4. Use two screws to secure the Motor to the Assembl
y
.
5. Reinstall the Fuser Full Cover
(
RRP 1.1
)
.