Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 10-91
Release Version 11-97
Removal and Replacement Procedures
RRP 4.6 Registration Sensor (PL 6.1)
Removal
1. Open the Left Upper Cover.
2. S
q
ueeze in all four Sensor latches while
y
ou pull the Sensor out of the Re
g
istration Chute Assembl
y
.
3. Disconnect J103 from the rear of the Sensor.
Replacement
1. Reconnect J103 to the Re
g
istration Sensor.
2. Insert the Sensor into the cutout in the Re
g
istration Chute Assembl
y
.
3. Press in on the Sensor unit it snaps into place.
4. Close the Left Upper Cover.