Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 10-39
Release Version 11-97
Removal and Replacement Procedures
RRP 2.11 Tray 1 & Tray 2 Paper Size Sensors (PL3.1 & PL3.4)
Removal
1. Remove either Paper Tray 1 or Paper Tray 2 from the printer.
2. Disconnect the P/J from the Size Sensor PWB.
3. Remove the screw securing the Size Sensor PWB to the printer frame, pull the PWB straight out and
remove it from the frame.
Replacement
1. Remove either Paper Tray 1 or Paper Tray 2 from the printer.
2. Reinstall the Paper Size Sensor PWB onto the printer frame.
Align the positioning tabs and screw holes.
3. Reconnect the P/J to the Size Sensor PWB.
4. Use one screw to secure the PWB to the frame.
5.
Reinstall the Paper Tray.