Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 10-33
Release Version 11-97
Removal and Replacement Procedures
RRP 2.8 Tray 1 & Tray 2 Front Chute Assemblies (PL3.1 & PL3.4)
Removal
1. Remove either Paper Tra
y
1 or Paper Tra
y
2.
2. Use a flat blade screwdriver to unhook the front of the Chute, and remove the Chute.
Replacement
1. Remove either Paper Tra
y
1 or Paper Tra
y
2.
2. Reinstall the Chute b
y
slidin
g
the openin
g
in the rear of the Chute into the tab on the printer frame,
then hookin
g
the tab at the front of the Chute into the openin
g
on the frame.
3. Reinstall the Paper Tra
y
.