Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 10-29
Release Version 11-97
Removal and Replacement Procedures
RRP 2.6 Support Assembly Spring (PL3.3)
Removal
1. Remove Tra
y
1 Lift Up Motor
(
RRP 2.1
)
.
2. Remove the screw securin
g
the Support Assembl
y
Sprin
g
to the printer frame, and remove the Sprin
g
.
Replacement
1. Reinstall the Support Assembl
y
Sprin
g
.
(
Refer to the fi
g
ure for correct positionin
g)
.
Make sure the front and rear arms of the Sprin
g
are positioned as shown in the fi
g
ure.
2. Use one screw to secure the Sprin
g
to the frame.
3. Reinstall Tra
y
1 Lift Up Motor
(
RRP 2.1
)
.